Radio Accessories

SPEEDCOM SCC-SEIH single ear intercom headset connects to all SPEEDCOM intercom units and features a built-in IMSA (4C) male connector for simple, reliable driver to passenger communications. SPEEDCOM Single Ear Headset Details: Manufacturer: SPEEDCOM Manufacturer part number: SCC-SEIH Flexboom length: 18 cm Wiring harness length: 3 ft & 19.5 in Wiring harness protocol: IMSA 4C Male Earpiece speaker details: The actual speaker portion of the SPEEDCOM SEIH Single Ear Intercom Headset is quite small. Measuring approximately 3.5 cm diameter, the thickness is 2 cm microphone and pillow pad. The pillow pad compresses easily and has the right amount of "give" for comfort. Earpiece flex boom microphone: Attached to the speaker is a flex boom noise cancelling microphone. The flex portion of the boom is 14 cm long and the mini microphone adds 4 cm, making it 18 cm long total for full reach around anyone's face to their mouth. The compact size works in every helmet we tried on. Earpiece wiring harness: Why do students pull the earpiece out by the wires? That is the question for the ages. SPEEDCOM changes how headsets are built by making the harness with a built-in molded plug. Other brands use the compression of the two speaker piece halves to hold the wire, but SPEEDCOM uses a wire that has the security block built into the harness during the manufacturing stage. Is this a more expensive way to build a headset? Certainly. Is it the better way to build a headset? Defiantly. Using the most popular form of racing protocols, IMSA, the lead is 3 ft and 19.5" long and a perfect length for either a dash mounted unit or shoved between the seat of a D.E. car, or in the instructors hand.

Racing Radio Foam Ear Buds - Universal Foam Driver Earpieces By Racing Radios. Designed with Ultra High Noise Transducers. Plugs directly into Driver Helmet with 3.5mm jack and has a 19" wiring lead. This is the industry standard foam earpiece used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS Helmet connection: Universal 3.5mm Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: Pro If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for Professional Teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.  

Racing Radios Helmet Earpiece Jack This is the piece that connects your ear pieces to your helmet cord. Heat shrink on gold plated connections provide years of trouble free communications, in the harshest of weather conditions. This is a true pro level motorsports piece of equipment. This is the new version that accepts stereo and mono ear pieces. Racing Radios Helmet Earpiece Jack Connector Manufacturer: Racing Radios Manufacturer Part Number: HKP-123100-H Weatherproof: Yes Earpiece Connection Size: Universal Mono & Stereo Entry level or Pro: Pro

Racing Radios 4/C IMSA Helmet Coil Cord Racing Radios 4 Conductor IMSA Helmet Coil Cord. This IMSA coiled cable for your helmet kit makes driver changes even easier by allowing you more movement to prevent accidental disconnects. If you have a head containment seat, this is a necessary item as the straight cord becomes bound up on the head containment portion of your race seat. Racing Radios IMSA Helmet Coil Cord (4 Conductor) Details Manufacturer: Racing Radios Manufacturer part number: HKP-1214010-H Car Harness End: IMSA (4 Conductor) Helmet End: Open (4 wires) Straight or Coiled: Coiled Gold Tipped Connections: Yes Entry level or Pro: Pro

Racing Radios Helmet Mini Microphone Kit Pro Level Racing Radios Mini Dynamic Noise-Cancelling, Flexible Boom Microphone for your helmet. The Noise canceling microphone is an essential part to any helmet kit. This microphone will cancel out background and engine noise to provide clear communication from the driver. Racing Radios Helmet Mini Microphone Kit Details: Noise Canceling: Yes Microphone Size: Mini Entry level or Pro: Pro Manufacturer: Radio Connector Manufacturer Part Number: HKP-126120 [img-2311-left-large_default]

Racing Radios Velcro Mount Push To Talk (PTT) RPT-40 Push to Talk Button By Racing Radios Has An Easy Mount Velcro Strap to attach to your steering wheel. Radio communication is within reach and requires minimal movement. This is a great spares item. Racing Radios Velcro Mount Push To Talk (PTT) Details: Manufacturer: Racing Radios Manufacturer part number: RPT-40 Wheel Attachment: Velcro Cord Style: Coil Harness connector: Universal 3 pin

Racing Radio Earpiece Mount Tab Kit Racing Radio Earpiece Mount Tab Kit uses a hourglass shaped tab to wrap around your earbud jack that secures to a matching tab (included) that you mount inside your helmet against the inside shell. This kit allows for securely mounting your Racing Radios ear bud jack to your helmet with no drilling. Racing Radio Earpiece Mount Tab Kit Details: Manufacturer: Racing Radios Manufacturer part number: VELCRO-TAB

Racing Radios NASCAR Male Helmet to IMSA Female Chassis Adapter If you have a NASCAR 3/C plug on your helmet and an IMSA 4/C Harness in the car, this adapter will go in line between your helmet and the harness to convert your 3/C output to a 4/C output. This cable is handmade in America using a Nexus plug and magnetically shielded cabling. Racing Radios NASCAR Male to IMSA Female Adapter Details: Manufacturer: Racing Radios Manufacturer part number: RRC-10 Connector 1 / Helmet Side: NASCAR 3C Female Connector 2 / Chassis Side: IMSA 4C Male [img-2298-left-large_default]

Racing Radios Heavy Duty Push To Talk (PTT) Racing Radios Screw (Hole) Mount PTT Switch. Custom Made by the Production Team at Racing Radios, these push to talk switches are used by the top race teams around the world. Screw mount switch provides a secure mount and reliable connection. Rubber boot for all weather protection. Racing Radios Hole Mount RPT-30/B/H Hole Mount PTT Tech Specs: Manufacturer: Racing Radios Manufacturer part number: RPT-30/B-H Chassis connection: 3 Pin industry standard connection (universal) Minimum hole size: .62" Coil cord: Yes Weatherproof: Yes Momentary: Yes

Racing Radio Replacement Foam for Ear Buds If you have a set of driver earpieces on which the foam is starting to get worn, this is the direct replacement to easily bring your earbuds back to the DB lowering, nice looking and feeling fit once again. How to replace the foam on the end of your drivers earpieces: Cut the old foam earpieces using a new razor blade - slicing like a banana without cutting the wire, transducer, or sound tube Peel off the foam and use your finger nail or the edge of tweezers to remove the remaining glue Insert the tweezers into the foam hole and stretch the hole from the flat side of the foam for 30 seconds Slide the transducer into the elongated hole until the sound tube is near the end of the round part and let sit for 1 minute Put a micro dot of super glue on the wire to foam connection on flat side and you are done Racing Radio Replacement Foam for Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-COVERS Qty in kit: 2 [img-6502-left-large_default]

Reprogram Radios - Frequency Match Reprogram Radios with supplied frequency sheet or scan-copy. Let DiscoveryParts reprogram all of your radios to match frequency and channels. You will receive a complete data sheet showing receive, transmit and squelch codes for all channels programmed. We can use your channels of "fill it up" with random frequencies to make sure you always have a clear channel available. Price per pair.

Racing Radios Basic Thru-Hole Push-To-Talk (PTT) Racing Radios Screw Mount PTT Switch. These Push-To-Talk Switches are used by the top race teams around the world. Screw mount switch provides a secure mount and reliable connection. Racing Radios Basic Thru-Hole Push-To-Talk (PTT) Details: Manufacturer: Racing Radios Manufacturer part number: RPT-60 Manufacturer alternate part number: AM006 Wheel mount: Through hole Harness end: 3 Pin Hole required for mounting: 0.61" [img-2317-left-large_default]

Phenom Elite Shark Fin 3db Gain Antenna The Phantom Elite 3db Gain Antenna, nicknamed the Shark Fin, features a patented, true field diversity that outperforms many conventional whip antennas. The exclusive low-profile stealth antenna with Patented Field Diversity technology etched on a circuit board. All of the benefits of the Antenna Phantom antenna in a stealth design. The unique patented Phantom Elite Antenna is a tough antenna for outdoor or indoor applications. The Phantom Elite Antenna's revolutionary design features field diversity with both vertical and horizontal polarization components. This gives the antenna diversity, frequency agility, low visibility, wide bandwidth and a low angle radiation pattern that is superior to traditional gain antennas in most applications. The industry standard NMO mounting socket mates with all Racing Radios antenna kits. We also provide a threaded stud mount model for vandal resistant mounting on brackets, panels, ceilings or any other kind of housing. The Phantom Elite Antenna's patented technology is beneficial when high performance is desired and extreme ruggedness and low profile is required. Whipless Design: The patented whipless design of our Phantom antenna allows car washes without removing the antenna. Whipless means they don't look like antennas, attract less attention, less vandalism, and have lower wind resistance. The Phantom Antenna is also less susceptible to damage by trees, garages or other obstructions. Field Diversity: Field diversity means that the antenna is simultaneously sensitive to both the electric and magnetic fields of the signal, like having two antennas. Field diversity makes the antenna resistant to the picket-fence fading and multipath nulls that are found in urban operation and undulating mobile environments. Permanent Mounting: Permanent mount versions of the UHF and higher frequency models are available for high risk applications such as metering where antennas must resist vandalism and achieve economical mounting. Versatile: Excellent for voice or telemetry applications.

Racing Radios Thru-Hole Push To Talk (PTT) Racing Radios Screw Mount PTT Switch. Custom made by the production team at Racing Radios, these push to talk switches are used by the top race teams around the world. Screw mount switch provides a secure mount and reliable connection. Racing Radios Thru-Hole Push To Talk (PTT) Details: Manufacturer: Racing Radios Manufacturer part number: RPT-50 Minimum mount hole diameter: .48" 3 Pin industry standard connection

Stilo to Apple iPhone Adapter Cable Now connect your Stilo Helmet to your iPhone or cellphone's 3.5mm audio jack. If you want to use your Stilo helmet electronics and connect to your cell phone 3.5mm female jack, this is your cable. Stilo to Apple iPhone Adapter Cable (No PTT) Details Manufacturer: Custom Manufacturer part number: RR-STILO-CELL-ADAPTOR Cable end #1: Male Stilo Stilo end cable length: Approximately 21" coil cord (can extend further with special order) Cable end #2: Male 3.5mm Male 3.5mm end cable length: Approximately 69" straight cord Cord style: Straight Country of manufacture: USA Having a Stilo 4C male connector mated to a 3.5mm male connector, you can have clear communication from your phone to Stilo helmet.