DiscoveryParts

LIQUI MOLY Motor Oil Saver / Leak Stop - 300mL The LIQUI MOLY Motor Oil Saver / Leak Stop maintains and regenerates rubber and plastic seals in the engine oil circuit of gas and diesel engines. Oil consumption due to aged and hardened valve stem seals is reduced. No more blue exhaust smoke, improved emissions. External leaks are minimized or even eliminated. Dampens engine noise and reduces repair costs. The LIQUI MOLY Motor Oil Saver comes in a 300 mL container.   LIQUI MOLY Motor Oil Saver / Leak Stop - 300mL Details: Manufacturer: LIQUI MOLY Manufacturer part number: 2020 Volume: 300 mL Revitalizes rubber & plastic engine seals in the engine oil circuit Reduces oil consumption LIQUI MOLY Motor Oil Saver / Leak Stop - 300mL Use: 300mL treats 3-5L of engine oil Sealing begins after 400 - 500 miles Recommended every 20,000 miles The LIQUI MOLY Motor Oil Saver in 300mL is sufficient to treat 3-5L of motor oil. This product is self-mixing, and can be added to your engine oil at any time. The sealing effect will begin to take place after 400 - 500 miles, and LIQUI MOLY recommends using this product approximately every 20,000 miles (30,000 km).

Honda Challenge racers using the 20008-2012 Accord and 2012-2014 Civic chassis, this is the steering wheel hub adapter you want. Smaller that the competition, so no trimming of the dash panels or gauge cluster is required, like the other Ford steering wheel adapters out there. NRG Innovation Steering Wheel Adapter for early Ford Mustangs is the number one best seller.

 NRG Innovation Steering Wheel Short Adapter for BMW E-30, E30 M cars and more is the number one best seller. These units were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum. 

OMP Lightweight Quick Release Hub is a high-performance steering Quick Release System that is equipped with a locating pin to ensure quick and precise alignment. The connector is Aluminum Body, ip68 sealing, 10,000 cycles guarantee, high temp and chemical resistant.

Light and solid, the OMP's 60mm steering wheel spacer bolts between your race car steering wheel hub and steering wheel to bring your race car steering wheel 60mm closer to you. The OMP steering wheel spacer is rock solid and a beautiful machined piece that dresses up every race cockpit with your choice.

OMP Steering Wheel Hub Adapter For BMW E30 To Put an OMP, MOMO, or Sparco Steering Wheel On The Factory Steering Column. Special Note: Airbag equipped models require a washer for proper fitment. Washer can be found at any local hardware store.

OMP Steering Wheel Hub Adapter Kits allows for the quick and easy installation of an aftermarket steering wheel to your race car. The 6-bolt hub pattern will fit all OMP steering wheels, along with many Sparco, MOMO and other steering wheel brands with a 6-bolt hole pattern (except wheels from Nardi and Personal). Adapter kits are designed to bolt directly to your car's existing steering column (installation hardware, such as nuts/bolts, not included).

These products include a unique agent that lowers temperatures by reducing or eliminating bubbles or vapor barrier that form on hot metal surfaces. It cleans and lubricates water pump seals as well as improve heat transfer and reduces cylinder head temperpature. Formerly known as Supercool® With WaterWetter® Convenient, pre-mixed coolant for motorcycles, ATVs, karts etc. - pour and go Blended with purified, deionized water and proper WaterWetter percentage Reduces rust, corrosion and electrolysis, cleans and lubricates water pump seals Compatible with all antifreeze and coolant Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes Contains no ethylene glycol

For Moderate To Low Load, Qualifying, Red LineSuperlight ShockProof Gear Oil has a film thickness greater than an SAE 75W90, yet low fluid friction like ATF.  Popular in British F3, Euro F3 and Star Mazda racing gearboxes for ultra low drag.

AiM Sports Temperature Sensors AiM Sports temperature sensors are the right sensors for AiM loggers and dashes to measure your exhaust gas temperatures (EGT), as well as oil, water, or any other fluid temperature. Their K-type thermocouples and thermoresistor sensors are available in a choice of M5 and M10 threads, as well as ceramic coated or exposed element ends. Sometimes, racing is just common sense, and ideal operating temperatures can maximize performance. Monitor temperatures with AiM sensors for accurate data to maintain your race engine's optimum efficiency.