Coolshirt

Coolshirt CoolShirt 120V Battery Wall Charger $62.00

CoolShirt 120V Battery Wall Charger - All CoolShirt Systems This CoolShirt replacement battery charger is a direct replacement for the CoolShirt battery charger that is included with all battery powered CoolShirt coolers. Easy to connect to your CoolShirt battery, use this 120v wall charger to keep your CoolShirt Battery fully charged. Manufacturer: CoolShirt Manufacturer part numbers: CHI-5004-0002 Wall end: Standard 120V wall outlet Cooler end: CoolShirt battery pack male end

Coolshirt CoolShirt 13 or 19 Qt Pro Air & Water Cooler from $523.00

Coolshirt Pro Air & Water System The Coolshirt Pro Air & Water System can be used with any Coolshirt cooling garment. It effectively sends temperature-controlled cooling water through the garment along with blower-enhanced, cooled, HEPA-4 filtered air to your helmet. The Coolshirt Pro Air & Water System can be used with Coolshirt products like the CoolWater Shirt or 2Cool Water FR SFI 3.3 Shirt. The Coolshirt Pro Air & Water System provides 300 watts (1,023 BTU) of continuous cooling per hour. Its 235 CFM blower and 13- or 19-quart cooler unit (with internal pump) deliver temperature-controlled cool water to your Coolshirt and chilled air to your helmet. You can independently regulate the temperature and flow of air and water with the included FC-2 Dual Temperature Control Switch, fine-tuning the temperature to your ideal comfort level. Twelve feet of double-insulated water hose, complete with quick disconnects and an automatic shutoff, attach the shirt to the unit. Emergency pull releases are standard on all water hose connections, so if you have to exit the vehicle in a hurry your Coolshirt will automatically unplug from your cooler. SYSTEM DIMENSIONS: 13-quart: 6 lbs, 14" x 11" x 9.5" 19-quart: 7 lbs, 15.5" x 13" x 10.5" Coolshirt garment sold separately.

-37% sale

00
DAYS 00
HRS 00
MIN 00
SEC

Coolshirt Coolshirt 2Cool Water FR Shirt (SFI 3.3 Rated) $199.00 $286.00

Coolshirt 2Cool Water FR Shirt SFI 3.3 This Fire Resistant (FR) cooling shirt keeps you cool, calm, and comfortable under the most intense driving conditions, delaying dehydration and helping keep your mind on the race. A cooler core body temperature has been shown to improve both reaction time and mental concentration! The Coolshirt 2Cool Water FR shirt plugs into any Coolshirt hard-sided or bag cooling system with its dry quick-disconnect insulated hoses. Clean seam tubing sewn into the fabric’s interior, patented non-kink tubing, plus advanced antimicrobial protection and moisture-wicking properties ensure the Coolshirt 2Cool Water FR Shirt keeps you cool, dry, and comfortable. And it's easy to maintain: machine wash, hang dry, and go! The Coolshirt 2Cool Water FR shirt won’t shrink, fade, or pick. FEATURES SFI 3.3 certified, Flame-Resistant Long-Sleeved Cooling Undershirt Superior Moisture-Wicking Properties Versatile Mid-Weight Layer Ag47 Anti-Microbial Protection Modacrylic / Rayon Blend Extra Length Easy Care

Coolshirt CoolShirt 4" Filter and Screen $12.00

CoolShirt 4" Filter and Screen Keep dirt out of your forced air helmet with a CoolShirt replacement filter and screen kit for your CoolShirt 4" inlet air blower system. This is the complete filter & screen kit with 1 filter and one metal screen. This is a must have for all helmet air systems to keep that "dust" and everything else from blowing into your helmet cooling ducts and then into your eyes. A cool helmet blower system that is clean runs longer, faster, and more efficiently. Keep your head as cool as possible with a CoolShirt 4" filter and screen assembly. CoolShirt 4" Filter and Screen Kit Details: Manufacturer: CoolShirt Manufacturer part number: 5013-0014 DiscoveryParts part number: CHI-5013-0014 Fits blower input: 4" Metal Screen included: Yes Filter qty: 1

Coolshirt CoolShirt 4" Filter Kit Qty 10 $16.00

CoolShirt 4" Filter Kit Qty 10 Your CoolShirt helmet blower system uses an ultra-lightweight filter to keep dirt out of your forced air helmet. The CoolShirt 5013-0013 kit includes 10 replacement filters to provide a full season of "clean" racing. Fitting both 3" and 4" CoolShirt blower systems, this is a great track side spares kit. CoolShirt 4" Filter Kit Qty 10 Details: Manufacturer: CoolShirt Manufacturer part number: 5013-0013 Fits blower input: 4" or 3" Metal Screen included: No Filter qty: 10

Coolshirt Coolshirt Air Blower System $253.00

Coolshirt Air Blower System The Coolshirt Air Blower system is the most economical way to get fresh, filtered air to the driver for relief from that hot helmet. It's designed to attach to the driver's helmet intake and comes complete with a 235 CFM blower motor, a clear air hose, and a HEPA-4 air filter to ensure the driver's air is clean and virtually particle-free, down to 4 microns. Breathe fresh, clean air using a Coolshirt Air Blower system! The system includes three feet of 3" diameter inlet hose (to the blower), four feet of 1-1/2" diameter outlet hose (from the blower to the helmet), a 12V 235 CFM blower, and a HEPA-4 air filter. Requires a ported helmet (sold separately). The blower measures 5 3/4" long overall and draws 4.3 amps.

Coolshirt Coolshirt Club Bag Portable Cooler from $447.00

Coolshirt Club Bag Portable Cooling System The Coolshirt Club Bag is designed for the weight-conscious racer who wants a cooling solution without having to permanently mount a hard cooler system in the car. It's designed to utilize two Endurance Ice packets to provide a great, easy cooling solution without the hassle of permanently mounting the system. The Club Bag can be can be wired into the car's 12V system or powered by an optional rechargeable 7.4V lithium-ion battery kit. This system is perfect for the club racer who needs to keep cool during sprint races or for the track-day enthusiast who can't mount a hard cooler. Weighing only two pounds and measuring 8" x 7" x 10", it fits in tight spaces that a regular cooling system won't!

Coolshirt Coolshirt Club Cooler (Cooler and Pump Only) from $310.00

Coolshirt Club Cooler The compact Coolshirt Club Cooler is designed for those racing applications that have space for a fixed-mounted cooler for longer races. Perfect for road racing, circle track, drags and many other racing types, it's a favorite among NASA, SCCA, and PCA drivers! The Club Cooler keeps you cool and alert so you feel your best in the waning laps of a race, when heat is a big factor in fatigue and loss of focus. Plus, you can stay cool waiting in the pits or on the grid. The Coolshirt Club Cooler comes as a 13- or 19-quart cooling unit with an internal water pump that supplies cooled water to your Coolshirt garment (sold separately) through double-insulated hose (also sold separately) with automatic shutoff quick-disconnects. Add an optional FC-1 Temperature Controller for complete control over your cooling comfort in the race car. COOLER DIMENSIONS 13-quart: 3 lbs, 14" x 11" x 9.5" 19-quart: 4 lbs, 15.5" x 13" x 10.5"

Sold out

Coolshirt Coolshirt Complete Club System All-In-One Kit $0.00

Coolshirt Complete Club System Kit PACKAGE PRICE STARTS AT $456 WITHOUT COOLING SHIRT OR FC SWITCH Discovery Parts assembled this kit putting everything you need to reduce fatigue, reaction time, and dehydration all in one place! Anyone who uses a Coolshirt system will tell you, once you race with one you'll never race without it. Our Complete Club System Kit makes it easy to assemble everything you need, and you save $25 versus buying the pieces separately! 1 Coolshirt coolers have been seriously upgraded in recent years, with new encapsulated pumps rated for an incredible 25,000 hours of continuous operation. Each Coolshirt Complete Club System Kit starts with your choice of a 13- or 19-quart Coolshirt Club System cooler, a mounting tray and tie-down straps, and your choice of a 4-ft, 8-ft, or 12-ft insulated water hose (hoses can be cut to length for your installation). You can add a CoolWater Shirt and an FC-1 Temperature Controller to create a complete driver cooling package! The Coolshirt Complete Club System is the preferred choice for racers at all levels of the motorsport. Whether you race with NASA, PCA, SCCA, IMCA, Chump Car, LeMons, WRL or any other organization, this system's ease of use and unparalleled quality will keep you performing at your peak. Add the optional FC-1 Temperature Controller for total control over your comfort in the race car. The FC-1 Temperature Controller allows you to optimize the flow of water whether you're sitting in the paddock or grid or racing in high-heat conditions. The optional Coolshirt CoolWater shirt contains about 50 feet of medical-grade capillary tubing securely stitched on the front and back of the shirt, covering up to 40% of the body. It connects to the cooler via insulated hose with dry quick-disconnects. You can upgrade to the Coolshirt Evolution cooling shirt, with double the tubing of the standard CoolWater shirt. This provides even more efficient heat transfer, keeping your core temperature stable for longer. Or combine cooling with fire protection by adding Coolshirt's newest SFI 3.3 Rated Evolution FR shirt with the same double-tubing sewn into a long-sleeve SFI 3.3 flame-resistant shirt. COMPLETE SYSTEM KIT INCLUDES Coolshirt Club System cooler (13- or 19-quart) Mounting tray Maintenance additive Water supply/return hose (4-, 8- or 12-foot) with dry quick-disconnects OPTIONS INCLUDE Coolshirt CoolWater short-sleeve shirt Coolshirt Evolution cooling short-sleeve shirt Coolshirt SFI 3.3 Evolution FR long-sleeve shirt FC-1 temperature controller COOLER DIMENSIONS 13-quart: 3 lbs, 14" x 11" x 9.5" 19-quart: 4 lbs, 15.5" x 13" x 10.5"

Coolshirt Coolshirt Connectors from $10.00

Coolshirt Hose Connectors FEATURES: 5/16" connectors that work with your Coolshirt system as well as others. Sold individually, you'll need two to adapt a garment properly. Choose connector style: Male or Female. SYSTEM COMPATIBILITY (Coolshirt/Momo/F.A.S.T.): Coolshirt MALE connectors work with any FEMALE connector (Coolshirt, Momo or F.A.S.T.). So no matter which system you have, a Coolshirt Coolwater shirt will work with it because of the MALE connector on the shirt. If you own a Momo or F.A.S.T. cooling shirt and want to use it with a Coolshirt system, simply purchase two Coolshirt MALE connectors, snip off the connectors on your shirt, and replace them. That's it! Because the Coolshirt male connectors are universal, your shirt will now be usable with all three major cooling systems. Even if you’ll be racing in another car which uses a F.A.S.T. or Momo system, the new Coolshirt MALE connectors you just pushed on will work with it.

Coolshirt Coolshirt Cool Water Shirts from $167.00

Coolshirt Cool Water Shirt The Coolshirt Cool Water shirt paired with a Coolshirt Club System or MobileCool Bag System (sold separately) circulates cooled water over the driver’s torso, keeping them comfortable and focused on the race track! The Coolshirt Cool Water shirt connects to any cooling system with a quick-disconnect insulated hose. Advanced moisture-wicking properties, antimicrobial protection, and “clean seam” tubing sewn into the interior of the Coolshirt Cool Water shirt keeps the driver cool, dry, and comfortable. The patented non-kink tubing helps ensure consistent, continual cooling. All Coolshirt Cool Water shirts are easy-care with no special laundering needed. Just machine wash and hang to dry. Won’t pick, fade, or shrink. Cool Water shirt is available in black or white.

Coolshirt Coolshirt Cool-A-Clava $115.00

Coolshirt Cool-A-Clava The Coolshirt Cool-A-Clava literally helps you keep a cool head under pressure! This helmet insert is superior to any current air- or water-based head cooling unit on the market. The Coolshirt Cool-A-Clava plugs in to any current Coolshirt cooler or bag system. The Cool-A-Clava requires no special hardware and can be used with nearly every helmet available! Last but not least, the Coolshirt Cool-A-Clava eliminates the need to install a separate helmet blower system. That's less drain on your electrical system, fewer hoses, less weight and lower chance of an equipment failure. This is, without a doubt, a must-have to stay cool and focused while on track.

Coolshirt Coolshirt Cooler Maintenance Additive 16-oz. $15.00

Coolshirt Maintenance Additive was developed by Coolshirt technicians as the best way to keep Coolshirt driver cooling systems, tubing in your car, and your Coolshirt garments clean and clear of mold. This non-toxic, biodegradable solution contains a fungicide, yet it's safe to use in all Coolshirt cooling systems. Regular use of Coolshirt Maintenance Additive will not only help clean your system, it will also improve the performance and life of the system pump. Use 2 oz. of additive every time your Cooling system is used (6 oz. for the large multi-person pit cooling systems).

Coolshirt Coolshirt Cooler Mounting Tray from $91.00

The Coolshirt Cooler Mounting Tray secures hard-shell units like the Club or Pro System coolers to your vehicle. Comes with a strap, choose 13- or 19-quart depending on your cooler size.

Sold out

Coolshirt Coolshirt Drag Pack Complete Drag Racing System $1,006.00

Coolshirt Drag Pack Cooling System The Coolshirt Drag Pack complete system helps drag racers go straight as fast as possible! Designed specifically for drag racers, this complete kit comes with the Drag Pack ice-based cooler system, a Driver Cooling Vest, an eight-foot insulated hose, and a seven hour lithium-ion battery with charger. The Driver Cooling Vest helps stabilize body temperature and is deal for drivers with limited space or short-duration races. Many drag racers use this system to stay comfortable during staging, and then disconnect quickly at start time. Others leave them running the whole time. Either way, the improvement in driver comfort and focus is night and day! Research shows that driver reaction times alone can increase by as much as 20% with only a 2% loss in hydration. The Drag Pack system covers 30-40% of the body with cold water circulating through tubing designed to dissipate heat away from the body, cooling your core and dramatically lowering dehydration. In terms of body temperature, cooler is faster! The Drag Pack system comes with emergency pull release standard, facilitating quick driver extraction in an emergency. SYSTEM INCLUDES MobileCool 1 (6qt) or MobileCool 2 (12qt) cooler Driver Cooling Vest (size S to XXL) Eight-foot insulated water hose with emergency-pull releases Lithium-ion battery with seven-hour charger Two Endurance Ice packs

Find anything you need