Radio Accessories

Racing Radios 3/C NASCAR Style Helmet Kit (Coil) 3/Conductor NASCAR Coil Cord By Racing Radios Allows the driver to have some movement with the helmet. The kit comes with 3.5mm earpiece connection and top of the line noise canceling microphone. *Comes with installation instructions and mounting hardware*

Racing Radios Car 8' Antenna Kit - TNC Connector RAK-40/8 by Racing Rdios is a small semi-flexable rubber car antenna kit with an 8 Foot Cable attached to connect to radios with the TNC wiring connecor. Starting with the radio side, we have a TNC thread-on connector used on digital mobile base unit radios, like the Motorolla CM200D and CM300D. To make mounting easy, 8' of NMO cabling with metal shielding gives ample length to mount your antenna prefectly inthe centerline of the vehicle with the wiring tucked away nicely. Racing Radios Car 8' Antenna Kit with TNC Connector Details: Manufacturer: Racing Radios Manufacturer part number: RAK-40/8/MINI Radio Connector: TNC Cable Length: 8 Foot Antenna Style: Metal whip A TNC antenna is a special antenna that is used when a bulkhead fitting is used to run a cable through a perfectly sealed firewall. This is a special usage part.

Racing Radios Crew Radio Belt - Black The Perfect Addition For Your Crew Members - Racing Radios Crew Radio Belt holds radio holster and any accessories. Printed Racing Radios on the back of the belt. Ballistic nylon with plastic latch. Racing Radios Part Number: RR-BELT-BLACK Color: Black Material: Nylon Buckle: Non-Scratch Plastic

Stilo to IMSA Adapter Cable w/ Driver ID (4C to 5C) Connect your Stilo helmet to your IMSA driver ID radio systems where the car harness has a 5C driver id harness. This special Driver ID cable has a 5th conductor for the officials use to identify the driver in the vehicle. Each cable is custom built and has a special resistor with a four position micro-switch that is decoded to what driver is assigned to the vehicle, #1, #2, #3, #4. Stilo to IMSA Adapter Cable w/ Driver ID (4C to 5C) Details: Manufacturer: Racing Radios Manufacturer part number: RRC-ST50 Helmet end: Stilo 4C Chassis end: IMSA 5C (4C radio communications and 1C driver id) Cord type: Coil How do you change the assigned driver position from 1/2/3/4? Simply unthread the collar of on of the male ends and change the micro-switch to your assigned position. This cable is used in the WeatherTech or Michelin Sportscar Challenge and other series that uses the driver ID system. This is a special cable because it is a 5C (red connector) and different than your standard IMCA connection found in your SCCA/NASA/PCA race car. [img-9634-left-large_default]

Racing Radios Car 10' Antenna Kit - TNC Connector Car Antenna Kit By Racing Radios - With Rubber Antenna and 10 Foot Cable. TNC on Radio Side, NMO Cable With Metal Shielding, and Rubber TNC Bulkhead Adapter with Rubber Flex Antenna on the Other End. A TNC antenna is a special antenna that is used when a bulkhead fitting is used to run a cable through a perfectly sealed firewall. This is a special usage part. Racing Radios Car 10' Antenna Kit with TNC Connector Details: Manufacturer: Racing Radios Manufacturer part number: RAK-40/10/MINI Radio Connector: TNC Cable Length: 10 Foot Antenna Style: Metal whip [img-7752-left-large_default]

Racing Radios Push-To-Talk (PTT) Harness with Flying Leads Radio Push to Talk (PTT) harness that goes from your 3 pin chassis harness to flying leads (open ended wires) to allow you to easily go to your PDM, Motec Wheel, or custom application. Racing Radios Push-To-Talk (PTT) Harness with Flying Leads Details Manufacturer: Racing Radios Cord Style: Coil Harness connector: Universal 3 pin Wring connector: 2 open ended wires Length of metal 3 pin to coil: 6.5" Coil relaxed length: 8" Coil extended length: 24"~ Length of unterminated lead: 6" Racing Radios Push-To-Talk (PTT) Adapter Harness with Flying Leads has a 21"~ natural length that can be extended to 37"~ to allow for easy steering wheel removal for maintenance or fast driver changes.    

Motorola Antenna Adapter For HT750, HT1250, EX500/600, GP300, P110 Antenna Adapter for Motorola HT750, HT1250, EX500, EX600, GP300 and P110 Portable Radio To BNC Antenna Adapter. Use this to connect your 1/4 turn BNC antenna to the fully threaded adapter on the back of your Motorola HT750, HT1250, EX500, EX600, GP300 and P110. Motorola Antenna Adapter For HT750, HT1250, EX500/600, GP300, P110 Details Manufacturer: Motorola Manufacturer Part Number: 5885705M02 Use: Adapt BNC Antenna to Motorola HT750, HT1250, EX500, EX600, GP300 and P110 Portable Radios Antenna end: BNC 1/4 turn

Racing Radios Car 8' Antenna Kit - BNC Connector Car Antenna Kit With Whip Antenna And 8 Foot Cable By Racing Radios. BNC on Radio Side, NMO Cable With Metal Shielding, and UHF Whip Antenna on the Other End. This is the normal 1/4 turn chrome connector that goes on the radio. Racing Radios 8' Antenna Kit Details: Manufacturer: Racing Radios Manufacturer part number: RR-CAK-40-BNC-8 Radio End Connector: BNC Quarter Turn Cable Length: 8 Foot Antenna Style: Whip UHF [img-2372-left-large_default]

Motorola CP200, CP200D & PR400 Series Replacement Battery Motorola CP200, CP200D and PR400 hi-capacity 2250mAH Li-Ion long life battery. Genuine OEM Motorola to power your radios longer. This Motorola Li-Ion battery Is Ready For the Harshest Race Condition You Can Compete in. Motorola CP200 Series Li-Ion Battery Details: Compatible Motorola Radios CP150, CP200, CP200-XLS, CP200D, EP450, EP450S, PR400 Type/Style Batteries-Standard Listed Under The Following Manufacturer Part Numbers NNTN4497, NNTN4497_R, NNTN4497AR, NNTN4497BR, NNTN4497CR Manufacturer Motorola Solutions Brand Motorola Solutions Color Black Warranty Motorola Solutions - 1 Year Rating 7.4V IMPRESS No Memory Effect No Requires Maintenance No Minimum Rated Capacity 2190 mAh Operational Time (hours) Low Power - 17 hours, High Power - 14 hours Chemistry Li-Ion Intrinsic Safety Standard MSHA IP Rating IP54 Operating Temperature Range -10C to +60C

Racing Radios Motorola XPR and APX Two-Way Headset Cable The standard headset cable for the MotoTRBO XPR6550/7550 Handheld from Motorola with 5 pin standard headset connection. Connects to all Racing Radios and David Clark two-way headsets with standard 5 pin wiring connection. Racing Radios Motorola XPR and APX Two-Way Headset Cable Details: Manufacturer: Racing Radios Manufacturer part number: RDH-XPR End #1: Motorolla XPR Radio Cold Pin connector w/ single set screw End #2: Standard 5 Pin Headset Cable

Motorola Mobile Harness Interface The Motorola Mobile Harness Interface is used to connect a Motorola Base Unit Radio to the X-1000 Advanced Expandable Intercom. Motorola Mobile Harness Interface Details: Manufacturer: Motorola Manufacturer part number: MOT-MJ Motorola Base Unit to X1000 Intercom

Racing Radios Car 12' Antenna Kit - TNC Connector Car Antenna Kit By Racing Radios - With Rubber Antenna and 12 Foot Cable. TNC on Radio Side, NMO Cable With Metal Shielding, and Rubber TNC Bulkhead Adapter with Rubber Flex Antenna on the Other End. A TNC antenna is a special antenna that is used when a bulkhead fitting is used to run a cable through a perfectly sealed firewall. This is a special usage part. Racing Radios Car 12' Antenna Kit with TNC Connector Details: Manufacturer: Racing Radios Manufacturer part number: RAK-40/12/MINI Radio Connector: TNC Cable Length: 12 Foot Antenna Style: Metal whip [img-7751-left-large_default]

Motorola Acoustic Tube In-Ear Surveillance Kit Acoustic Tube In-Ear Surveillance Kit connects to your Motorola hand held radio and allows complete communication (transmit and receive) with one piece. Listening to requests from crew members and driver coaches who want the smallest/simplest/rugged communications piece, the Pryme Motorola Acoustic Tube In-Ear Surveillance Kit V2 is the answer.. Working from the Motorola Handheld Radio, the harness splits to a mini-snap action push to talk (PTT) and also goes to your earpiece. The single earpiece is a single wire acoustic tube that fits left or right ears. A miniature lapel microphone has a small metal clip for easy positioning. Motorola Acoustic Tube In-Ear Surveillance Kit Details: Manufacturer part number: SPM-2503 Easy and convenient to use. Single wire acoustic tube for left or right ear compatibility. Designed for left or right ear use. Small lapel PTT with inline PTT/ Mic and metal clip. Fits Motorola Two-Pin Style Radios Entry level or Pro: Pro

Racing Radio Foam Ear Buds European RCA Male Plug Foam driver earpieces for European "RCA" style helmet connection. In the USA we use a male 3.5mm connector to connect to our earbud jack, but in many European series the wiring protocol is based on the RCA style connection. Racing Radios RR-CE31-A/FOAMS-RCA has a 19" wiring lead and industry standard foam earpiece used by Racing Radios for over 30 years. Racing Radio Foam Ear Buds Details: Manufacturer: Racing Radios Manufacturer part number: CE31/A-FOAMS-RCA Helmet connection: European RCA Male Foam Tipped: Yes Wiring Length: 19" Entry level or Pro: European Pro This is a very special item only used in European racing series and wil not work with US radio components. If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done. Racing Radios is considered the go to for Professional Teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.

Motorola CP200D, CP200, 6 Unit Multi-Charger The Motorola PMLN6588S charges up to 6 Motorola CP series radios from completely empty to full in under 3 hours. Using the advanced design, you may charge a complete handheld Motorola radio or just a single un-installed battery. This is the genuine Motorola "6 gang" charger you see every pro team using. While there are inferior chargers, this genuine Motorola smart charger makes sure your batteries are topped off and not overcharged. Inferior copies use a constant Volt & AMP charge protocol that modern Motorola radios batteries do not like. Motorola batteries are advanced Hi-Capacity Lithium-ion also called Li-ion. Help your genuine Motorola hand held radios have their peak performance and the longest battery life. [img-12143-left-large_default] Motorola CP200D, CP200, 6 Unit Multi-Charger Details: Manufacturer: Motorola Manufacturer part number: PMLN6588A Compatiblility: Motorola CP200D, CP200, PR400, CP200.XLS, and CP150 Series Radios and Batteries Charges: 1-6 radios or bateries at 1 time Charge time: 3 hours Power supply: 110 VAC (standard US outlet) Height: 6-1/64" Length: 17-1/2" Width: 11-1/2" Material: Polycarbonate/Metal [img-12143-left-large_default]