M3 (E46)

Carbotech CT394 BMW E36 / E46 M3 Front Front BMW E36 & E46 M3 Carbotech Brake Pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech CT394 BMW E36 / E46 M3 Front Details: Manufacturer: Carbotech Manufacturer part number: CT394 Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 Most popular track combination: R10 Front, R8 Rear Carbotech cross reference: 394 Hawk cross reference: HB135 Material thickness of pad and backing plate: 16mm [img-15381-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-15381-left-large_default] Carbotech CT394 BMW E36 / E46 M3 Front also fits: 1987 BMW 735I NO SUBMODEL ALL (1987, 1987) 1988 BMW 735I NO SUBMODEL ALL (1988, 1988) 1988 BMW 735IL NO SUBMODEL ALL (1988, 1988) 1988 BMW 750IL NO SUBMODEL ALL (1988, 1988) 1989 BMW 525I NO SUBMODEL ALL (1989, 1989) 1989 BMW 735I NO SUBMODEL ALL (1989, 1989) 1989 BMW 735IL NO SUBMODEL ALL (1989, 1989) 1989 BMW 750IL NO SUBMODEL ALL (1989, 1989) 1990 BMW 525I NO SUBMODEL ALL (1990, 1990) 1990 BMW 735I NO SUBMODEL ALL (1990, 1990) 1990 BMW 735IL NO SUBMODEL ALL (1990, 1990) 1990 BMW 750IL NO SUBMODEL ALL (1990, 1990) 1991 BMW 525I NO SUBMODEL ALL (1991, 1991) 1991 BMW 735I NO SUBMODEL ALL (1991, 1991) 1991 BMW 735IL NO SUBMODEL ALL (1991, 1991) 1991 BMW 750IL NO SUBMODEL ALL (1991, 1991) 1991 BMW M5 NO SUBMODEL ALL (1991, 1991) 1992 BMW 525I NO SUBMODEL ALL (1992, 1992) 1992 BMW 735IL NO SUBMODEL ALL (1992, 1992) 1992 BMW 750IL NO SUBMODEL ALL (1992, 1992) 1992 BMW M5 NO SUBMODEL ALL (1992, 1992) 1993 BMW 525I NO SUBMODEL ALL (1993, 1993) 1993 BMW 740I NO SUBMODEL ALL (1993, 1993) 1993 BMW 750IL NO SUBMODEL ALL (1993, 1993) 1993 BMW M5 NO SUBMODEL ALL (1993, 1993) 1994 BMW 525I NO SUBMODEL ALL (1994, 1994) 1994 BMW 740I NO SUBMODEL ALL (1994, 1994) 1994 BMW 750IL NO SUBMODEL ALL (1994, 1994) 1995 BMW 525I NO SUBMODEL ALL (1995, 1995) 1995 BMW M3 NO SUBMODEL ALL (1995, 1995) 1996 BMW 528 SERIES E39; SEDAN #N/A (1996) 1996 BMW M3 NO SUBMODEL ALL (1996, 1996) 1997 BMW 528 SERIES E39; SEDAN #N/A (1997) 1997 BMW 528I E39; SEDAN (1997, 1997) 1997 BMW 528I NO SUBMODEL ALL (1997, 1997) 1997 BMW M3 NO SUBMODEL ALL (1997, 1997) 1998 BMW 528 SERIES E39; SEDAN #N/A (1998) 1998 BMW 528 SERIES E39; TOURING #N/A (1998) 1998 BMW 528I E39; SEDAN (1998, 1998) 1998 BMW 528I E39; TOURING (1998, 1998) 1998 BMW 528I NO SUBMODEL ALL (1998, 1998) 1998 BMW M3 NO SUBMODEL ALL (1998, 1998) 1998 BMW Z3 M ROADSTER ALL (1998, 1998) 1999 BMW 528 SERIES E39; SEDAN #N/A (1999) 1999 BMW 528 SERIES E39; TOURING #N/A (1999) 1999 BMW 528I E39; SEDAN (1999, 1999) 1999 BMW 528I E39; TOURING (1999, 1999) 1999 BMW M3 NO SUBMODEL ALL (1999, 1999) 1999 BMW Z3 M COUPE ALL (1999, 1999) 1999 BMW Z3 M ROADSTER ALL (1999, 1999) 2000 BMW 528 SERIES E39; SEDAN #N/A (2000) 2000 BMW 528 SERIES E39; TOURING #N/A (2000) 2000 BMW 528I E39; SEDAN (2000, 2000) 2000 BMW 528I E39; TOURING (2000, 2000) 2000 BMW Z3 M COUPE ALL (2000, 2000) 2000 BMW Z3 M ROADSTER ALL (2000, 2000) 2001 BMW 525 SERIES SEDAN #N/A (2001) 2001 BMW 525 SERIES TOURING #N/A (2001) 2001 BMW 525I SEDAN (2001, 2001) 2001 BMW 525I TOURING (2001, 2001) 2001 BMW M3 NO SUBMODEL ALL (2001, 2001) 2001 BMW Z3 M COUPE ALL (2001, 2001) 2001 BMW Z3 M ROADSTER ALL (2001, 2001) 2002 BMW 525 SERIES SEDAN #N/A (2002) 2002 BMW 525 SERIES TOURING #N/A (2002) 2002 BMW 525I SEDAN (2002, 2002) 2002 BMW 525I TOURING (2002, 2002) 2002 BMW M3 NO SUBMODEL ALL (2002, 2002) 2002 BMW Z3 M COUPE ALL (2002, 2002) 2002 BMW Z3 M ROADSTER ALL (2002, 2002) 2003 BMW 525 SERIES SEDAN #N/A (2003) 2003 BMW 525 SERIES TOURING #N/A (2003) 2003 BMW 525I SEDAN (2003, 2003) 2003 BMW 525I TOURING (2003, 2003) 2004 BMW 525 SERIES MANUAL TRANSMISSION #N/A (2004) 2004 BMW 525I MANUAL TRANSMISSION (2004, 2004) 2005 BMW 525 SERIES MANUAL TRANSMISSION #N/A (2005) 2005 BMW 525I MANUAL TRANSMISSION (2005, 2005) [img-15381-left-large_default]

Ferodo FCP1073Z DSUNO BMW E46 M3 Front Brake Pad Set Fitting the front of the BMW E46 M3, the Ferodo FCP1073Z in the DSUNO compound is a medium torque, endurance brake pad. From the working temperature of 392 F to 1382 F, the Ferodo DSUNO features a predictable torque curve with an average friction coefficient of 0.48µ. With a wide temperature range and level torque curve, the Ferodo DSUNO is a popular mid-distance endurance race and track day pad. Ferodo FCP1073Z DSUNO Details: Manufacturer: Ferodo Manufacturer part number: FCP1073Z-N Compound: DSUNO Primary Use: Mid range endurance 6~ hours, track days Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.48µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DSUNO Brake Compound Details:The Ferodo DSUNO is a predictable mid-endurance compound designed for repeatable stopping, lap after lap. Featuring one of the flattest torque curves of the Ferodo brake pad line, the Ferodo DSUNO is a mid-distance endurance compound with an average coefficient of friction of 0.48µ across the workable range of 392 to 1382 F. The cold friction profile of the Ferodo DSUNO is low, proper bedding and warm-up is recommended for optimum performance all the way to its maximum 1382 F limit. The Ferodo DSUNO is a popular choice in brake pads for many track drivers and endurance racers. Ferodo FCP1073Z DSUNO BMW E46 Front Brake Pad Fitment: Fits: BMW E46 M3 Front Most popular track combination: Matched Set DSUNO Front & Rear Ferodo FCP10737Z Dsuno Fitment Guide Front Axle: 2006 BMW M3 E46 Competition Pkg 2006 BMW M3 E46 non-Competition Pkg 2005 BMW M3 E46 Coupe 2004 BMW M3 E46 Coupe 2003 BMW M3 E46 Coupe 2002 BMW M3 E46 2001 BMW M3 E46

Ferodo FCP1073H DS2500 BMW E46 M3 Front Brake Pads Fitting the front of the BMW E46 M3, the Ferodo FCP1073H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FCP1073H DS2500 BMW E46 M3 Front Brake Pad Details: Manufacturer: Ferodo Manufacturer part number: FCP1073H-N Primary Use: Street & Light Track Average Coefficient of Friction: 0.41 Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500, but it is the perfect dual purpose street and light track day pad. Ferodo FCP10737H DS2500 Complete Fitment Guide: 2006 BMW M3 E46 Competition Pkg 2006 BMW M3 E46 non-Competition Pkg 2005 BMW M3 E46 Coupe 2004 BMW M3 E46 Coupe 2003 BMW M3 E46 Coupe 2002 BMW M3 E46 2001 BMW M3 E46

Brembo Front 355x32 Rotors and Six-Piston Calipers FITS: BMW M3 (E46) BMW Z4 (E85) BMW Z4 (E86) For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track -ay sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with six pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, T√úV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

Brembo 355x32 Two-Piece Iron Rotors and Four-Piston Calipers FITS: BMW M3 (E46) 2000-2006 BMW Z4 Roadster (E85) 2002-2008 BMW Z4 Coupe (E86) 2006-2008 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monobloc components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, T√úV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, or Silver Number of Pistons: 4 Disc Size and Construction: 355mm x 32mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: FRONT Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads