OMP
OMP ONE 2" Versa 6 Point Racing Harness
$479.00
OMP ONE 2" Versa 6 Point Racing Harness
The Super-Light ONE Versa 6 point camlock harness from OMP is designed specifically for sedan drivers using a HANS device. Special lightweight adjusters and compact lap belt mounting hardware are used to keep weight to a minimum. Even the buckle tabs have been lightened. This Versa model is ideal for endurance racing.
The shoulder belts are 2" wide along the entire length for better alignment with a HANS device. Each shoulder strap has loops just above the adjusters for attaching radio cables, drink tubes, or rubber bands. The lap belts are 2" wide, and you get both a lap belt set with pull-up adjusters and a lap belt set with pull-down adjusters to suit all installations. The 2" sub straps also have pull-up adjusters for quick driver changes. The rotary camlock buckle is permanently attached to the sub belts by a rounded T-bar. No more sitting on the buckle when you get in the car! Hook-and-loop fasteners on the lap and shoulder belts can also be used to keep the belts out of the way during driver changes. A special detent prevents accidental buckle release.
The shoulder belts include 3-bar sliders for wrap-around mounting. The lap belts have lightweight carabiners sewn in for use with eyebolts (included). The anti-sub belts have snap-in end plates installed with 3-bar sliders for easy conversion to wrap-around mount. Includes 4 forged eyebolts with 7/16-20 UNF threads.
Available in Black or Red
Schroth
Schroth Clubman 2x2 6 Point Racing Harness
$399.00
Schroth Clubman 2x2 6 Point Racing Harness
Schroth's Clubman has one aim: to provide a superior harness for people needing a lower-cost belt.
The Clubman features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Clubman pull up lap belts, and a T-bar non adjustable sub strap. Shoulders and sub strap hardware is wrapped in.
The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfecting on a FHR device, creating optimal force distribution on the surface of the device.
ADJUSTERS AND OPTIONS
The adjusters on the Clubman belt are heavier and not as easy to use. They are, however, cheaper and bring down the overall cost of the harness. In addition the sub strap does not have adjusters and the lap hardware is not interchangeable.
Only available with snap-in, pull-up lap belts. Laps are not reversible like they are on the Flexi 2x2.
FEATURES:
2” shoulder belts
2” Profi pull-up lap belts with sewn-in snap-in hardware
T-bar sub non-adjustable strap
Rotary cam lock
Sparco
Sparco 6 Point Racing Harness (2" Steel Pull Down)
$375.00
Sparco Six-Point Racing Harness
2" HANS SHOULDER BELTS W/ STEEL ADJUSTERS
Sparco’s full line of harnesses works in unity with Sparco's competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. This six-point HANS-compatible harness features two-inch lap and shoulder belts. This design allows for easy use with a HANS or other head and neck restraint device.
Each strap attaches in the center using aircraft-quality quick-release buckles, with integrated anti-submarine belts. The steel adjusters allow for smooth, quick adjustments and perfect clamping. Shoulder and sub belts attach to your car or seat mounts using snap-on fittings, with carabiner fasteners for lap belts.
This harness is FIA approved.
TECHNOLOGY
2" lap and shoulder belt
Light-weight carabiner fasteners for lap belts
Pull-Up lap belts
Light-weight steel adjuster for smooth and quick tensioning
Snap-in mounting kit included
FIA Approved
Available in black, blue, or red.
Sparco
Sparco 6 Point Racing Harness (3" Steel)
$365.00
Sparco 6 Point Racing Harness (3" Steel)
Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. Our 6-point harness features 3-inch lap and shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only.
TECHNOLOGY
3" lap and shoulder straps
Pull-Up lap belts
Light-weight steel adjuster for smooth and quick tensioning
Snap-in Kit Mounting included
FIA Approved
Sabelt
Sabelt Steel Series 2 Inch Rally Harness
$329.00
Sabelt Steel Series 2 Inch Rally Harness
Featuring full-length 2" belt webbing, super-strong steel adjusters, and Sabelt's innovative and patented cam-lock buckle, the Steel Series are among our favorite six-point harnesses for safety, craftsmanship, and comfort. With a market-leading price tag, the Sabelt Steel Series represent great value as well!
FEATURES:
FIA 8853-2016 Approved
Shoulder straps: full 2’’ width, steel adjuster
Shoulder mount: snap hook / tri-bar
Lap belts: full 2’’ width, steel adjuster
Crotch belt: full 2’’ width - snap hook / tri-bar mounting
Pull-up lap adjusters
Snap hook mounting
New compact buckle designed with crotch mount integrated into cam-lock body
Sparco
Sparco 4 Point Racing Harness (3" Steel)
$319.00
Sparco 4 Point Racing Harness (3" Steel)
Strap In and Level Up Your Ride with the Sparco 4 Point Racing Harness! The Sparco 4 Point Racing Harness is here to redefine your driving experience, turning every ride into a secure, race-ready adventure. And no, we're not just pulling your leg... or should we say, your lap belt?Why the Sparco Harness is the Co-Pilot You Didn't Know You Needed:Unity in Safety: Designed to work in perfect harmony with Sparco's competition seats, this harness doesn't just keep you in place; it becomes one with your racing setup. It's like finding the peanut butter to your jelly.Quality that Speaks Volumes: Crafted from top-notch fabric and boasting durable fasteners, this harness ensures that once you're strapped in, you're in for a secure and comfy ride. No more wiggling around trying to find that sweet spot!A Perfect Fit: With 2-inch lap and 3-inch shoulder straps, this 4-point masterpiece offers a snug embrace. And thanks to the aircraft-quality quick-release buckle with integrated anti-submarine belts, getting in and out is a breeze—no advanced engineering degree required.Smooth Operator: The lightweight steel adjusters are like butter, making tensioning smooth and clamping just perfect. Because who has time for complicated adjustments when the track is calling?Snap to It: Each belt comes with snap-on fixings, making installation a snap (pun intended). And since they're FIA approved, you can hit the track with confidence, knowing you're as safe as can be.Tech Specs to Impress:Lap of Luxury: 2" lap belts for that just-right fit.Shoulder the Load: 3" shoulder straps to keep you snug without the hug-too-tight feel.Pull for Power: Pull-up lap belts for on-the-fly adjustments.Smooth Moves: Lightweight steel adjusters for that seamless tensioning.Snap Happy: Snap-in Kit Mounting included because who doesn't love convenience?Seal of Approval: FIA Approved, because your safety is non-negotiable.Imagine hitting those corners with the confidence of a pro, strapped in securely, focused on the finish line, not on your seatbelt. That's what the Sparco 4 Point Racing Harness brings to the table—or should we say, to the driver's seat.Grab your Sparco 4 Point Racing Harness now and transform every drive into a track-worthy triumph!
Sparco’s full line of harnesses works in unity with our competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. The 4-point harness features 2-inch lap and 3-inch shoulder straps that attach in the center using an aircraft-quality quick-release buckle with integrated anti-submarine belts. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the frame using snap-on fixings. Available in pull up only.
TECHNOLOGY
2" lap and 3" shoulder straps
Pull-Up lap belts
Light-weight steel adjuster for smooth and quick tensioning
Snap-in Kit Mounting included
FIA Approved
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Lifeline
Lifeline Becketts 6 Point FIA Racing Harness (2028 Expiry)
$199.99
$369.99
Lifeline Becketts 6 Point Racing Harness 2028 Expiry
Carrying a FIA 8853-2016 homologation, these high quality harnesses are designed and built in the UK at Lifeline's ISO 9001:2015 factory. This ensures that the high quality and attention to detail seen on the rest of Lifeline's motorsport safety products are carried over to every feature of the Lifeline Becketts 6 Point Racing Harness.
The Lifeline Becketts 6 Point Racing Harness delivers extreme attention to detail such as longer buckle tongues to make it easier to positively insert the buckles into the harness camlock. They also include both snap hook and bolt-in end fittings, giving you a wide variety of installation options.
The unique and lightweight aluminum buckle mechanism on the Lifeline Becketts 6 Point Racing Harness has been designed for easy, positive latching and the buckle has been manufactured from high quality aerospace-grade materials, ensuring maximum confidence from the driver that the harness is correctly and safely latched in place.
Always Install Your Racing Harness at the Proper Angles
Lifeline Becketts 6 Point Harness Details
FIA 8853-2016 Homologation
Webbing: Full 3" webbing material is used in all positions.
Camlock: Lifeline uses a lightweight, oversized rotary lever system to make release easy with gloves on. Also, a great feature we noticed is the ability for the lever to go "over-center" and stay in an open position. It also automatically returns to the "ready to latch" position, ensuring maximum driver confidence that the harness is safely and correctly latched.
Waist and Shoulder Adjusters: Anti-slip steel adjusters on both lap and shoulder belts ensuring easy adjustment for a secure, tight fit.
Chassis Fittings: To make installation easy and safe, Lifeline includes Snap hook Fittings. Lifeline uses a non-sewn/lock-bar system so using the enclosed harness ends or wrapping around the cage is easy.
Born of Quality: Built by artisans in the UK. Not just designed in the UK and built somewhere else, the Lifeline Becketts harness is both designed and manufactured in the UK at Lifeline's ISO 9001:2015 accredited factory.
This harness is only available in pull-up lap belt configuration.
Schroth
Schroth B23A Bendable Harness Snap End Kit
$24.95
Schroth B23A Bendable Harness Snap End Kit
Schroth B23A harness ends are bendable and make racing harnesses easier where there is very little clearance. The Schroth B23A bendable snap-on harness adapter lets you bolt one end to the chassis, bend it to the needed shape, and attach your harness snap end.
Schroth B23A Bendable Harness Snap End Kit Details:
Manufacturer: Schroth
Manufacturer part number: B23A
Manufacturer alternate part number: SR 01324
Bendable Fittings: Yes (2)
Bolts: Yes (2) 7/16-24
Wavy Washers: Yes (2)
Combination Washers: Yes (2)
The B23A End Fitting Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. Schroth slang calls it a "Rallye End" kit because it usually comes on the street legal Rallye style belts. Like the 01323 kit, it is designed to be bent. These pieces are commonly used in Porsche applications where space for an Eye bolt is insufficient. This bracket can be bolted to the car, then bent so that a Snap-In bracket can be used to fix the harness to the bracket.
We use Schroth B23A brackets in many applications where stock mounting locations do not leave sufficient space, or if the thread pitch is different from the eye bolts. If you have a Miata, S2000 or are putting a large/very large seat in a full interior car this is the harness mount kit you want.
Schroth
Schroth Harness Grips
$15.95
Schroth Harness Grips
Schroth's street legal harnesses have loops sewn into the end of each adjusting strap. These are plastic dowels that can be put through those loops to give something firm to grab on to when adjusting the belts. This really gives you an advantage when the temperatures are high, or when you're wearing gloves. It makes it much easier to get the belts as tight as you should be wearing them.
Sold in sets of four which is enough for one street legal harness
[img-15499-left-large_default]
Schroth Harness Grips Details:
Manufacturer: Schroth
Manufacturer part number:00092
Material: Plastic
Schroth
Schroth Reinforcement Plates M10
$12.50
Schroth Reinforcement Plates M10
Schrtoth SG55 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.
Schroth Racing SG55 Reinforcement Plate Details:
Manufacturer: Schroth
Manufacturer part number: SG55
Length: 3.25"
Width: 2"
Welded Nut Size/Pitch: M10
Finish: Zinc Plated
Material: Steel
Quantity in kit: 1
Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M10 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to.
This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Schroth
Schroth Reinforcement Plates M8
$12.50
Schroth Reinforcement Plates M8
Schrtoth SG54 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.
Schroth Racing SG39 Reinforcement Plate Details:
Manufacturer: Schroth
Manufacturer part number: SG54
Length: 3.25"
Width: 2"
Welded Nut Size/Pitch: M8
Finish: Zinc Plated
Material: Steel
Quantity in kit: 1
Schroth M8 Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a M8 nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to.
This back-up plate is what comes standard issue with most Schroth Racing Harness kits
Schroth
Schroth Reinforcement Plates 7/16" x 20TPI
$12.50
Schroth Reinforcement Plates 7/16" x 20TPI
Schrtoth SG39 reinforcement plates, also called back-up plates by many chassis builders, are used when reinforcing a harness mount point when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet metal, you will need to put a reinforcement plate under it to keep it from ripping out of the floor.
Schroth Racing SG39 Reinforcement Plate Details:
Manufacturer: Schroth
Manufacturer part number: SG39
Length: 3.25"
Width: 2"
Welded Nut Size/Pitch: 7/16 x 20TPI
Finish: Zinc Plated
Material: Steel
Quantity in kit: 1
Schroth 7/16" x 20TPI Reinforcement Back-Up Plates make for a perfect harness install. This Schroth back-up plate measures 3.25" long x 2" wide with a 7/16 x 20 TPI nut welded to it. This is what comes with most Schroth harness sets to mount your harness eye bolt to.
This back-up plate is what comes standard issue with most Schroth Racing Harness kits
OMP
OMP - EYE BOLT PLATE (DB4186)
$12.50
Seat belt plate with threaded 7/16 nut ready to be welded to the chassis. Complying with FIA.
MEASURES50x80x3 mm