Arai CK-6 Karting Helmet (Youth)
Arai Arai CK-6 Karting Helmet (Youth) $579.95
Arai CK-6 Youth Karting Helmet The Arai CK-6 is designed specifically for junior kart racers who are too small to comfortably fit and/or support the weight of an adult model SK-6 karting helmet. Meets the SNELL/FIA CMR standard for junior karting CK-6 FEATURES SRC Superior Resin shell material, developed and formulated in-house at Arai, dramatically improves the bonding properties of standard fibers, allowing the use of less material for reduced weight and lower cost. Removable/Replaceable cheek pads in optional sizes allow for custom fit when needed. Easily removable 5mm top layer of foam allows for further custom fitting. Wide and tall eye port for an exceptional field of view. Large intake vent toggles for easy operation, with large rear vents for improved ventilation. Features taken directly from the GP-6PED auto-racing helmet. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it's needed while lowering the center of gravity. Rise in shell above the shoulders for added clearance. SPECIAL YOUTH SIZING XXS: 50-51cm XS: 52-53cm S: 54-56cm M: 57-58cm L: 59cm An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.
Sold out
OMP KS-2R Kart Racing Suit
OMP OMP KS-2R Kart Racing Suit $569.00
OMP KS-2R Kart Racing Suit 100% printed graphics for Profsssional kart racing exposure, the OMP KS-2R Karting Suit is sure to help you stand out as a winner! The belt-less design removes all seams from the waist front in order to greatly increase comfort while in a seated position. Elastic inserts in the suit's crotch region allow for maximum leg mobility, while full-float shoulders maximize movability for the arms. Highly breathable mesh inserts are generously applied under the sleeves, through the shoulders and into the pockets in order to maximize ventilation without sacrificing protection. Finally, padded inserts are added to the inner knees for bump protection. HOMOLOGATION:CIK-FIA level 2
Alpinestars Vapor Racing Suit showcasing advanced fabric technology, ideal for motorsports professionals seeking top-tier performance.
Alpinestars Alpinestars Vapor Racing Suit SFI from $549.95
Alpinestars Vapor Racing Suit  The Vapor Suit boasts a soft aramidic exterior, and its triple-layer design is crafted from durable, fire-resistant cotton twill combined with feltro padding, ensuring maximum protection for drivers. For enhanced mobility and comfort, the suit features stretch panels in the crotch, waist, and underarm areas. Its outer shell and lining, made of fire-resistant cotton twill, prioritize driver comfort. Notable design elements include arms and legs that are pre-curved, 3/4 stretchable arm design, and stretch panels on the shoulders. Additionally, the suit has a boot cut leg design with an inner elasticated cuff, further enhancing protection. protection. FEATURES New, three-layer construction Aramid Modacrylic assembly for maximum comfort, excellent resistance, and low weight. Anatomically engineered, pre-curved arms and legs provide an enhanced fit and an optimum position while driving. 3D Mesh lining for greater breathability. Aramidic knitted stretch panels on the back, waist, and crotch for ease of movement and enhanced comfort. Stretch panel construction on backs of shoulders and crotch for improved range of motion and comfort while driving. Ergonomic collar with soft, knitted lining for extended coverage and maximum comfort. 100% fire-resistant fabric provides high heat and flame-resistant proprieties. Alpinestars’ all-new Formula 1-derived extraction handle design provides an effective safety feature for the extraction of the driver in the event of a crash. Ribbed wrist and ankle cuffs for maximum comfort and reduced weight. Premium metal double-sided zipper, personalized for a versatile and customizable fit. Thigh pockets for convenient storage. Elastic waist construction for belt cinch fit. Regular fit design. Certified to SFI 3.2/5 homologation standard.    
Sparco K-Track Kart Racing Rib Protector
Sparco Sparco K-Track Kart Racing Rib Protector $449.00
Sparco K-Track Rib Protector   The Sparco K-Track is a hybrid rib protector vest designed to provide lightweight and flexible protection to drivers. It has been developed to exceed the standards set by the latest FIA 8870-2018 homologation, ensuring the highest levels of safety and protection. The K-Track features a sternum plate that adds an extra layer of protection to the driver's chest. The sides of the vest have multiple adjustments, allowing for a customized fit, and it has a soft stretch inner liner that conforms to the driver's shape in the seated position, offering enhanced comfort. YOUTH SIZES 120cm - 60-63cm Chest 130cm - 64-68cm Chest 140cm - 68-71cm Chest 150cm - 72-76cm Chest   ADULT SIZES XXS - 80-84cm Chest XS - 86-89cm Chest S - 94-97cm Chest M - 102-105cm Chest L - 110-113cm Chest     TECHNOLOGY FIA 8870-2018 Approved Lightweight and Flexible Soft Stretch Inner Liner Multiple Adjustments Available in Multiple Sizes
-11% sale
HANS Sport III Youth Head Restraint
00
DAYS
00
HRS
00
MIN
00
SEC
Hans HANS Sport III Youth Head Restraint $410.95 $457.00
Youth Size HANS III Device with Tether and Posts No smoke and mirrors, just #1 performance! The HANS Device is synonymous with head and neck restraint technology. It is the most widely used and recognized head and neck restraint in motorsports, the product that all other products on the market are measured against. HANS Devices are used in most racing series. The HANS Device HANS III Youth Series makes the lightest-weight composite HANS device in the world available in youth sizes! These devices feature an all-new design of polymer with a hollow collar that significantly reduces weight. The engineered reinforcements offer exceptional strength with the same high level of safety as every HANS device. The reduced overall mass and weight give extra comfort and movement, well suited for the youth racer. The HANS III youth series will fit neck sizes of 11-14 inches (28-36 cm). Choose from two tether/post styles: standard HANS FIA 8858-2010 Clip In/Out; or SFI 38.1 Quick-Release. FEATURES: The lightest weight composite HANS device offered. Engineered reinforcements with hollow collar. Posts and tether included, standard or QR. Exceptional comfort and movement. Suited for the youth racer. Fits neck sizes of 11-14 inches (28-36 cm). SFI 38.1 certified. The Youth Size HANS Device Sport III is value priced with the same performance as the Professional Series HANS Device. It is constructed from an injection molded super-structural carbon composite. The lower, rounded collar saves weight and allows for easier entry/exit in many smaller, tighter spaces. Sliding tethers come standard.
sale
Sparco X-Light Kart Racing Suit
00
DAYS
00
HRS
00
MIN
00
SEC
Sparco Sparco X-Light Kart Racing Suit from $375.00 $500.00
Sparco X-Light K Kart Racing Suit   The Sparco X-Light K 2020 karting suit is an ultra-lightweight suit specifically designed for mobility and comfort. It features unique ergonomic impact-absorbing padding on the outside elbow and inside knee. This strategic padding was requested by pro drivers to help with stabilization during intense lapping. The X-Light K features specially designed air intakes on the inner arms, inner thighs and lower legs that help cool the driver while driving. The X-Light K has pre-curved arms and full floating arm sleeves for comfort in the driving position. The stylish three-tone suit has half-moon stretch panel on the lower back for superior comfort and fit. CIK/FIA N2013.1 approved. TECHNOLOGY Ultra-lightweight suit material Ergonomic impact-absorbing padding Specially designed air intakes to cool the driver Pre-curved arms Full floating sleeves Three-tone colorways Half-moon stretch panel on lower back CIK/FIA N2013.1 approved
OMP KS-3 Kart Racing Suit
OMP OMP KS-3 Kart Racing Suit $349.00
OMP KS-3 Kart Racing Suit OMP KS-3 features high performance design at a competitive price. Constructed with a full Cordura outer layer, the KS-3 is homologated as a CIK-FIA Level 1 suit. The inner lining is composed of a soft, sweat wicking cotton material that is provides maximum breathability. Mesh inserts are built into the thighs, shoulders and pockets to further help with driver cooling. Pre-curved sleeves are attached with a fully-floating system for movement precision, while a low-cut collar is maximizes comfort in a seated karting position. HOMOLOGATION: CIK-FIA LEVEL 1
Alpinestars KMX-9 v2 Graphic 5 Kart Racing Suit
Alpinestars Alpinestars KMX-9 v2 Graphic 5 Kart Racing Suit from $329.95
Alpinestars KMX-9 v2 Graphic 5 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a Twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 5 colorways.
Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit
Alpinestars Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit from $329.95
Alpinestars KMX-9 v2 Graphic 3 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a Twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 3 colorways.    
Alpinestars KMX-9 v2 Graphic 2 Kart Racing Suit
Alpinestars Alpinestars KMX-9 v2 Graphic 2 Kart Racing Suit from $329.95
Alpinestars KMX-9 v2 Graphic 2 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening; stretch panels on the back, shoulders and waist for an optimized fit; and breathable mesh material on the crotch and underarms. PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zippers with personalized zipper pullers, plus double slider for versatile and customizable fit.    
Alpinestars KMX-9 v2 Graphic 1 Kart Racing Suit
Alpinestars Alpinestars KMX-9 v2 Graphic 1 Kart Racing Suit from $324.95
Alpinestars KMX-9 v2 Graphic 1 Kart Racing Suit Certified to CIK-FIA homologation standards, the KMX-9 v2 features an aggressive design and vibrant colorways for entry and intermediate level racers. Boasting three-layer construction for protection and low weight, this suit also has a 100% polyester toweling liner for driver comfort. Other driver-friendly design details include an angled front opening, stretch panels on the back, shoulders and waist for an optimized fit, and breathable mesh material on the crotch and underarms. PROTECTION Certified to CIK-FIA Level 2 homologation standard N 2013-1. Technical three-layer construction that meets the new homologation standard, featuring a twill polyamide outer shell, plus double technical linings for comfort and fit. Engineered for durability, minimal material bunching and high levels of abrasion resistance while the polytoweling lining offers moisture-wicking properties. CONSTRUCTION Advanced two-layer construction assembly for optimized performance, improved breathability and weight saving. Alpinestars asymmetric front opening design aids fitting. Tech mesh panels positioned on the underarms and seat area for optimized ventilation. Alpinestars Formula 1-derived design and technology shoulder epaulettes. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort with safe closure system. Adjustable waist belt allows a tight personalized fit. Knitted stretchable panels on back shoulder and lumbar area ensure minimal material resistance while driving. Engineered for durability, minimal material bunching and abrasion resistance, while the poly-toweling lining boasts moisture-wicking properties. KEY FEATURES Anatomical arm, leg and torso paneling is patterned to create the optimum position while driving. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offer a convenient storage option for those times away from the driving seat. Premium YKK zipper with personalized zipper pullers, plus double slider for versatile and customizable fit. Comes in two amazing Graphic 2 colorways.    
Alpinestars KMX-3 S v2 Youth Kart Racing Suit
Alpinestars Alpinestars KMX-3 S v2 Youth Kart Racing Suit $314.95
Alpinestars KMX-3 S v2 Youth Karting Suit CONSTRUCTION Technical two-layer construction that meets homologation standards features a polyamide stretchy outer shell for optimized performance that is engineered for durability, minimal material bunching and optimum abrasion resistance. Poly-toweling lining offers effective and proven moisture-wicking. Wide tech mesh panels strategically positioned on underarm, sides and seat area for optimized ventilation and airflow. Premium metal YKK zippers with personalized synthetic leather zipper pulls, plus double slider for a versatile and customizable fit. Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash. Ergonomic collar with soft lining for extended coverage and maximum comfort. PROTECTION Certified to CIK-FIA Level 2 homologation standard, N 2013-1. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. KEY FEATURES Collar features an adjustable closure system for maximum safety and security. Adjustable waist belt for a tight, personalized fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Knitted wrist and ankle cuffs provide a snug fit and help prevent unwanted movement of the suit. Two thigh pockets offers a convenient storage option for those times away from the driving seat. Comes in a wide range of aggressive new colorways.
sale
Sparco Prime-K Kart Racing Suit
00
DAYS
00
HRS
00
MIN
00
SEC
Sparco Sparco Prime-K Kart Racing Suit from $299.50 $599.00
Sparco Prime-K Kart Racing Suit The Prime-K is a premium karting suit designed for safety and comfort. It features unique printed design with hidden zipper and pockets. The Prime-K has specially designed air intakes on the inner arms, inner thighs and lower legs that help cool the driver while driving. The Prime-K has anti-abrasion Cordura back panels for protection. The stylish three-tone suit has perforated elastic stretch panel on the lower back for superior comfort and fit. The Sparco Prime-K is CIK/FIA N2013.1 approved. TECHNOLOGY Lightweight suit material Specially designed air intakes to cool the driver Cordura back panels for protection Hidden zipper and pockets provide easy storage Perforated stretch panel on lower back CIK/FIA N2013.1 approved
Sparco Kerb Lady Kart Racing Suit
Sparco Sparco Kerb Lady Kart Racing Suit from $279.00
Sparco Kerb Lady Kart Racing Suit The new Sparco KERB LADY karting suit is designed specifically for women. Made from light weight abrasion-resistant fabric, the KERB LADY features pre-curved arms, full-floating sleeves and strategically placed stretch panels and elastic for increased mobility. The KERB LADY has internal thigh and underarm vents for better breathability and a unique waist adjustment straps that delete the traditional belt. It features high-contrast accents for ultimate style. Available in 6 colors in sizes XS-XXL. The KERB is CIK-FIA 2013-1 approved.TECHNOLOGY Specific fit for women Unique waist adjustment straps Pre-curved arms Full floating sleeves Back stretch panel Internal leg and underarm vents for breathability CIK-FIA 2013-1 approved
Sparco Kerb Kart Racing Suit
Sparco Sparco Kerb Kart Racing Suit from $279.00
Sparco Kerb Kart Racing Suit The new Sparco Kerb karting suit is designed for safety and comfort. Made from light-weight abrasion-resistant fabric, the Kerb features pre-curved arms, full-floating sleeves and strategically placed stretch panels and elastic for increased mobility and comfort. The Kerb has internal thigh and underarm vents for better breathability and optimal cooling and a unique waist adjustment straps that delete the traditional belt. It features high-contrast accents for ultimate style. The Sparco Kerb is CIK-FIA 2013-1 approved. TECHNOLOGY Unique waist adjustment straps Pre-curved arms Full floating sleeves Back stretch panel Internal leg and underarm vents for breathability CIK-FIA 2013-1 approved