Close

Driveline

Blueprinted Miata Front Race Hubs - Racing Analytics Pro Series

RAL-58400

New

Blueprinted Miata Front Race Hub Set from Racing Analytics feature the best in material using specially selected new hubs to bring you a hub that is ready to bolt on and take on the longest races like the 25 hours of Thunderhill

More details

$384.99

Add to wishlist

Shipping Rates

More info

   

Blue Printed Miata Front Race Hub Set (2) Racing Analytics Pro Series

Blueprinted Miata Front Race Hub Set from Racing Analytics feature the best in material using specially selected brand new hubs to bring you a hub that is ready to bolt on and take on the longest races like the 25 hours of Thunderhill or finish your season closing championship race after taking a hit on the front rim and bending your front tie rod.

There are a many different "blueprinted" Miata hub sets available out there, but lets take a look at what it takes to build the best.

Hub Core: Only select new cores are media blasted, solvent cleansed, and thoroughly visually inspected. If something does not look right, it is rejected. Not every hub makes it to the final selection process. A hub used on a daily driver does not see the harsh loads a championship Spec Miata. These are genuine race quality hubs.

Bearings & Race: Matched new bearings and new races. This is one of the most overlooked area in a trackside hub rebuild. The key to having the lowest temperature is having the greatest bearing face mating area. We are going to support a given load and we can have the lowest temperature by dispersing the load across the largest of the bearing face area. For this reason we use bearings and races that are optimized for the greatest roller surface area.

Bearing Grease: Red Line CV-2 is designed for high-misalignment CV axles with extreme angles and resulting temperature. This makes it perfect for our Racing Analytics Blue Printed Race hubs. Having low temperature flow and a melting point of 900° F, allows a working temperature of -100° F to 500° F. Red Line CV-2 with Moly has been a pro chassis builders best friend for years. Red Line makes serious race quality synthetic lubes.

Wheel Studs: ARP, rolled thread, 190,000 psi, extra long, 8840 chrome moly, heat treated and cadmium plated bull nose studs are used. The extra length allows using wheel spacers or rims with different back-spacing and the bull-nose allows for lightning fast wheel nut engagement with minimal chance of cross threading. If only every other part of your Miata was a rugged as these professional quality racing wheel studs.

Dust Cap: We include 2 dust caps with every Racing Analytics Blueprinted Miata Front Race Hub Sets. What is the big deal about that little dust cap? Lets look at how to win a championship, consistency and repeatability. When you are checking your set-up before your next big race, you bring out the alignment strings.You go to square up your strings using the rear hubs (easy) and you measure off your front dust cap as your front reference. Something as simple as a dented/imperfect dust cap can bring havoc to your repeatability potential and accurate alignment.

Racing Analytics Blue Printed Miata Front Race Hub Details:

  • Manufacturer: Racing Analytics
  • Manufacturer part number: 58400
  • Fits Years: 1990-2005 NA & NB Chassis
  • Qty in kit: 2
  • Lug nuts included: Yes (8)
  • APR studs included: Yes
  • Dust caps included : (2)

Product Reviews

Also Bought Products

Close