Close

Hawk Brake

Hawk HB688G.710 Race Pad DTC-60 Stoptech ST-60 View larger

Hawk HB688G.710 Race Pad DTC-60 Stoptech ST-60

HB688G.710 DTC-60

New

Hawk's High Torque Enduro Pads For the Solid Stopping Stoptech ST-60 Caliper. The Hawk DTC-60 offers High torque with less initial bite than DTC-70. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force. Recommended for use with DTC-70 when split friction between front and rear axle is desired.

More details

$420.64

Add to wishlist

Shipping Rates

More info

Hawk HB688G.710 Race Pad DTC-60 Stoptech ST-60

Hawk's High Torque Enduro Pads For the Solid Stopping Stoptech ST-60 Caliper. The Hawk DTC-60 offers High torque with less initial bite than DTC-70. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force. Recommended for use with DTC-70 when split friction between front and rear axle is desired.

Hawk DTC-60 Characteristics. The Hawk DTC-60 offers high torque, excellent modulation and release with less initial bite than the Hawk DTC-70. What makes the Hawk DTC-60 (Hawk production code G) is it's superior release and torque control characteristics. The hawk DTC-60 brake pads are designed for cars with high deceleration rates with or without down force with sticky tires like DOT R compounds.

The Hawk DTC-60 has is Hawk's most popular track-only pad. We have seen about a 30-35% longer life at about 10% less maximum torque than the Hawk DTC-70.

The Hawk DTC-70 works best with sticky race rubber, hi-rate springs, and a well set-up shock package. Aero also helps. We sometimes use the Hawk DTC-60 to to split friction between front and rear axle by using a combination of DTC-60 and Hawk DTC-70. 

Hawk DTC-60 Brake Pad Properties:

  • Manufacturer: Hawk Brake
  • Manufacturer production code: G
  • Track only: Yes
  • Street: No
  • Operating temperature range: 400°-1600° F
  • Optimal temperature range: 700°-1100° F

Hawk DTC-60 Brake Pad Bedding Procedure:

  1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
  2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
  3. DO NOT DRAG BRAKES!
  4. Allow at least 15 minutes for the brake system to cool down.
  5. After step 4 is completed, your new Hawk Performance brake pads are ready for use.

Product Reviews

Close