Close

Hawk Brake

Hawk HB113G.590 DTC-60 Honda CRX Front View larger

Hawk HB113G.590 DTC-60 Honda CRX Front

HB113G.590 DTC-60

New

The Hawk DTC60 offers High torque with less initial bite than DTC 70. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force. Recommended for use with DTC-70 when split friction between front and rear axle is desired.

 

More details

$135.02

Add to wishlist

Shipping Rates

More info

Hawk HB113G.590 DTC-60 Honda CRX Front 

The Hawk DTC60 offers High torque with less initial bite than DTC 70. Superior release and torque control characteristics. 

Hawk DTC-60 Characteristics. The Hawk DTC-60 offers high torque, excellent modulation and release with less initial bite than the Hawk DTC-70. What makes the Hawk DTC-60 (Hawk production code G) is it's superior release and torque control characteristics. The hawk DTC-60 brake pads are designed for cars with high deceleration rates with or without down force with sticky tires like DOT R compounds.

The Hawk DTC-60 has is Hawk's most popular track-only pad. We have seen about a 30-35% longer life at about 10% less maximum torque than the Hawk DTC-70.

The Hawk DTC-70 works best with sticky race rubber, hi-rate springs, and a well set-up shock package. Aero also helps. We sometimes use the Hawk DTC-60 to to split friction between front and rear axle by using a combination of DTC-60 and Hawk DTC-70. 

Hawk DTC-60 Brake Pad Properties:

  • Manufacturer: Hawk Brake
  • Manufacturer production code: G
  • Track only: Yes
  • Street: No
  • Operating temperature range: 400°-1600° F
  • Optimal temperature range: 700°-1100° F

Hawk DTC-60 Brake Pad Bedding Procedure:

  1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
  2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
  3. DO NOT DRAG BRAKES!
  4. Allow at least 15 minutes for the brake system to cool down.
  5. After step 4 is completed, your new Hawk Performance brake pads are ready for use.

This part will fit (make sure that your vehicle is in the list):

  • 1988 HONDA CIVIC RT 4WD L4 1,6 GAS FI (1988)
  • 1989 HONDA CIVIC RT 4WD L4 1,6 GAS FI (1989)
  • 1990 HONDA CIVIC RT 4WD L4 1,6 GAS FI (1990)
  • 1990 HONDA CRX SI L4 1,6 GAS FI (1990)
  • 1991 HONDA CIVIC RT 4WD L4 1,6 GAS FI (1991)
  • 1991 HONDA CRX SI L4 1,6 GAS FI (1991)

Product Reviews

Close